To use a USB sharing VPN,follow these steps:

1. Open the VPN Browser:

   Launch your VPN client (e.g., OpenVPN, VPN Client, etc.).

2. Access the Network Menu:

   • Navigate to the Networks menu. On most VPN clients, this is found under the Settings or Networks tab.

3. Access IPconfig:

   • In the Networks menu, click on IPconfig (usually under the Networks menu of the Networks tab).

4. List Shared Networks:

   The interface will display a list of networks that are shared. This includes both the networks you have explicitly shared and any by default.

5. Select Networks to Share:

   If you want to share multiple networks, select them from the list. You can also add more networks later by clicking on them again and selecting "Add".

6. Adjust Sharing Settings:

   • If you want to enable or disable sharing for a specific network, use the Networks menu again. Click on the specific network you want to share, and you can choose to Share it or Disable it.

7. Save Your Changes:

   • After making your selections, save the changes by clicking the Save button.

8. Test the VPN:

   Once you've shared the desired networks, test the VPN to ensure that your connections are restricted to those networks.

Additional Tips:

• Use sudo Commands: To make sharing faster, use sudo commands in the network menu. For example:

  sudo ipconfig shared networks\n\n# List shared networks\nsudo ipconfig shared networks\n\n# Show default sharing\nsudo ipconfig shared networks default\n\n# Enable network sharing for a specific network\nsudo ipconfig shared networks 192.168.1.1\n\n# Disable network sharing\nsudo ipconfig shared networks off\n\n# Disable default sharing\nsudo ipconfig shared networks default off

• Be Mindful of Networks: If you want to keep a particular network private, consider using a VPN that doesn't share networks or switching to a VPN that restricts your network access.

By following these steps, you can effectively set up a USB sharing VPN to restrict your network traffic to specific networks.